Share, , Google Plus, Pinterest,


Posted in:

How To Build A Trailer?

Are you planning a long trip across the country and need a way to bring all your necessities? Are you moving to a new location and need a way to bring your furniture and other things? If you answered yes to any of these questions, then a trailer is certainly the resolution to your dilemma. It is a good idea to invest in a trailer. As a matter of fact, as soon as you possess a trailer you will begin to uncover various purposes that you never thought of for your trailer. A trailer is a engineless compartment with wheels that is attached to a vehicle in order to haul anything it is that you need to pull. It is truly a box on wheels. They can successfullycarry a lot of load at one time and can be either enclosed or open. Offered below are the directions on how to build your own trailer.

Necessary Materials:

Metal Sheeting
Axle assembly
Wheel assembly
1″ x 4″ Boards
Angle iron

Necessary Tools:

Tape Measure
Metal scissors
Welding machine


1.Initially, choose what kind of trailer you need and what size. Use the tape measure and measure the size that you desire to help you determine the amount of materials that you will need. You should frame out your trailer using angle iron that must be cut and welded to make the frame.

2.Next, use a pencil to draw out the design on metal sheets which should be based on your prior measurements. Use a metal scissors to cut out the plans you sketched on the metal sheeting.

3.Weld the parts together making sure that no gaps are left between them.

4.Install the axle. It should be placed in the centre of the wheels. Where you put the axle on the trailer depends on how you want the trailer to operate. If you want it to tilt backwards, then the axle should be set up close to the centre of gravity.

5.Install the wheels on the axle.

6.The tongue must now be connected to the trailer. It comprises a hand wheel, a coupler and a latch. Turn the trailer wrong side up and weld the coupler firmly to the body of the trailer using the welding machine. Weld the tongue beams in the similarly.

7.Affix a latch to the body of the trailer to help when connecting the trailer to another vehicle for haulage.

8.Take your tape measure and measure two pieces of 35″ x 18″ metal sheeting and cut using metal scissors. Take each sheet and measure 4″ from one end and make a an indicatation there on the two sides. Weld the forward spring hanger to the front of the suspended angle iron.

9.Next, measure 6″ from the free end and indicate again. Bend the sheet at this measurement and this will be welded at the exact mark to the rear of the overhang.

10.To make the flooring of the trailer, measure the length of the trailer and cut the boards using handsaw to match the size. Mark where each board join the iron of the trailer frame below and make an indication using pencil on each board. Mark on the iron as well. Use drill to create holes both in the iron and the board and then use screwdriver and long screws to screw the boards in place.

Paint the trailer to make it more appealing.
The tongue weight is the amount of force produced by the trailer. To uncover the tongue weight, evaluate the overall weight of the trailer. 5% of that is the tongue weight.

Please visit these links for more information on : How to Build a Trailer and Build a Trailer.