In case you’re thinking of adding a second storey to your present house, you need to assess the existing foundation, ascertain area required, reinforce foundation, remove the roof, develop the ceiling and also walls, and put trusses.
As your family grows bigger, so does your necessity for additional space. Instead of getting a new property, you can think about incorporating an additional storey to your present house structure. Some individuals prefer it this way simply because they like the location of their existing house, and it may end up being less costly than buying an entirely new place.
Examine existing foundation
Before you decide to proceed with the house expansion project, it is advisable that you get suggestions from competent home addition contractors to figure out if your existing foundation is sturdy enough to support another storey. An extra storey demands solid walls and support beams to be able to carry the extra weight. The first thing the professionals will do is evaluate the existing situation of your wall surfaces, look for rotten wood, and look into the strength of your concrete. As soon as you’ve gained their approval, you can now proceed with the next phase of your project.
Determine area required
After obtaining the eco-friendly light from home addition contractors, you could move on to figure out the necessary location of your second storey addition. In order to do this, it’ll help to start by determining the quantity of rooms you’d like to have on your second floor. This will help you set aside the required amount of space for the extension. You should decide this from the beginning, to help you plan where you can place these additional rooms and start drawing out the floor plans for expansion.
You will need to ensure that the foundation of your property is strong. Components that will require reinforcement involve your ceiling beams and also walls since these will bear the majority of the weight. It is vital to strengthen your walls with 2 by 4 studs if your present walls aren’t strong enough. After you’ve finished the reinforcement, find someone to come in and assess it before proceeding.
Remove the roof
In order to begin construction, you’ll need to eliminate the present roof. You will need to employ a crane to get this specific component done. If you don’t have expertise in this area, you need to get some expert help in order to decrease damage to the framework of your house. When the roof is removed, you can place in the ceiling and floor joints.
Develop the ceiling and walls
Having removed your property of the roof, you can start building the ceiling and also the walls of your second storey. The ceiling and floor joints need to be no less than one foot thick and 12 inches wide in order to be enough. For much better assistance, it’s necessary that the ceiling, along with joint support, must be 16 to 24 inches apart. Make your wall structures next because these will act the partitions between every space and form the rooms of the second story.
Trusses are essential to support the roof and ceiling. These are usually made of a structure of beams that will hold the weight of the roofing. Once you have set up these and all of the necessary plumbing and electrical cabling, you could then change the roof tiles, and focus on the finishing touches on the interior and also exterior wall surfaces.
It is important to stay safe and perform the work in gradual actions rather than hurrying through it all. A good foundation and solid build up will no doubt result in lasting results, and your house could last many generations to come.
Written by Patricia Strasser. If you are in search of good home addition contractors, take a look at http://www.alcoaconstruction.com/additions/second-story-addition/